Remote Control Encoders/Decoders Archives - ABACOM Technologies Inc.

Decoder with Latched/Pulsed Outputs, 4/8 Bit Data (HAT-12Dxx)

appx — Thu, 27 Apr 2017 18:33:19 +0000

Emulates the Holtek decoding protocol
12D4L – 4b Data, latched output – data sheet
12D8L – 8b Data, latched output – data sheet
12DV4P – 4b Data, variable delay pulsed output – data sheet
12D8P – 8b Data, 525ms delay pulsed output – data sheet

The post Decoder with Latched/Pulsed Outputs, 4/8 Bit Data (HAT-12Dxx) appeared first on ABACOM Technologies Inc..

RF Remote Control Decoder (HT-12F)

appx — Thu, 27 Apr 2017 18:25:43 +0000

Interfaces to any of ABACOM’s RF receivers
Establishes a secure single or multiple channel RF link
Simple, one resistor oscillator configuration
Decodes a 12 bit address and pulses the Valid Transmit pin for a match
Used in together with the HT12E encoder or HAT series encoders

data sheet

The post RF Remote Control Decoder (HT-12F) appeared first on ABACOM Technologies Inc..

Repeater, 4 Bits of Data (HAT-12RPT4)

appx — Thu, 27 Apr 2017 18:24:03 +0000

Emulates the Holtek decoding and encoding protocol
Data is decoded, moved to the data outputs, re-encoded and re-transmitted
Complimentary RF_PWR pins, which can sink/source up to 15mA each

data sheet

The post Repeater, 4 Bits of Data (HAT-12RPT4) appeared first on ABACOM Technologies Inc..

RF Remote Control Decoder (HT-12D)

appx — Thu, 27 Apr 2017 18:18:22 +0000

The HT12D data decoder decodes the data packet received from the HT12E encoder. It compares its own address configuration with the encoded address received from the HT12E encoder. If the addresses match, then the HT12D outputs outputs a valid transmission signal on its VT pin and latches on its 4 data ouptut pins, the states of the 4 data bits of the HT12E encoder. The four data bits on the HT12E encoder end can be changed “on-the-fly”, therefore up to 16 remote control output functions may be performed when using the HT12E encoder and a transmitter module together with the HT12D decoder and a receiver module.

Very simple to integrate
Compatible with our RF receiver modules
Robust error checking for high reliability and elimination of false triggers
Eight configurable address line provide up to 255 unique address combinations
Simple oscillator (decoding data rate) configuration using a single external resistor
Companion HT12E encoder or ABACOM’s HAT series encoders

data sheet

The post RF Remote Control Decoder (HT-12D) appeared first on ABACOM Technologies Inc..

RF Remote Control Encoder (HT-12E)

appx — Thu, 27 Apr 2017 18:16:48 +0000

The HT12E encoder features 8 address lines and 4 address/data lines, an output enable pin and an encoded data output pin which streams out the 12 bit encoded data packets. The data packets contain the encoded states of the 8 address lines and 4 address/data line. The oscillator is configured via a single external resistor which determines the data rate.

The HT12E encoder is designed for RF remote control applications and when used together with the HT12D or HT12F companion decoders, a secure and reliable RF remote control link can be easily designed with any of our FM or AM transmitter and receiver modules.

Very simple to integrate
Interfaces to any of ABACOM’s RF transmitter modules
Used for secure single or multiple channel RF remote control link
Simple oscillator (data rate) configuration using a single external resistor
Companion to the HT12D, HT12F, and ABACOM’s HAT series decoders

data sheet

The post RF Remote Control Encoder (HT-12E) appeared first on ABACOM Technologies Inc..

Two Channel Data Decoder (D2MB)

appx — Thu, 27 Apr 2017 18:11:33 +0000

The D2MB is a two channel remote control decoder module, with two monostable and two bistable outputs. The D2MB is very simple to interface to our AM or FM receiver modules to provide a complete solution to building a compact remote control receiver.

Note: On the RF transmitter side, the AM or FM RF transmitter modules require the Motorola (Freescale Semiconductor) MC145026 data encoder for compatibility with the D2MB remote control decoder module.

The monostable and bistable outputs of the D2MB are open collector transistor outputs ideal for switching various types of external loads such as relays. The monostable output time delay is configured by an external RC network.

Monostable and Bistable open collector transistor outputs
Compatible with the MC145026 transmitter encoder IC
Monostable output time delay is custom configured via an external RC network
5VDC to 15VDC operation, 1mA quiescent
Up to 50mA load switching

D2MB data sheet

The post Two Channel Data Decoder (D2MB) appeared first on ABACOM Technologies Inc..

Data Decoder Module (D1MB)

appx — Thu, 27 Apr 2017 18:06:32 +0000

The D1MB is a single channel remote control decoder module, with both monostable and bistable outputs. The D1MB is very simple to interface to our AM or FM receiver modules to provide a complete solution to building a compact remote control receiver.

Note: On the RF transmitter side, the AM or FM RF transmitter modules require the Motorola (Freescale Semiconductor) MC145026 data encoder for compatibility with the D1MB remote control decoder module.

The monostable and bistable outputs of the D1MB are open collector transistor outputs ideal for switching various types of external loads such as relays. The monostable output time delay is configured by an external RC network.

Monostable and Bistable open collector transistor outputs
Compatible with the MC145026 transmitter encoder IC
Monostable output time delay is custom configured via an external RC network
5VDC to 15VDC operation, 1mA quiescent
Up to 50mA load switching

D1MB data sheet

The post Data Decoder Module (D1MB) appeared first on ABACOM Technologies Inc..