Multi-Channel Intelligent RF Transceiver Module (AT-WIZ-7020)

$89.95$127.90

The AT-WIZ-7020 multi-channel transceiver modules are based on ABACOM Technologies’ AT-XTR-7020 embedded transceiver modules and as such may also serve as evaluation boards for the AT-XTR-7020 transceiver modules. The AT-WIZ-7020 modules are complete standalone transceiver modules which may be interfaced to 5V level CMOS/TTL hosts such as Arduino. Using the optional W232 adapter cable, the AT-WIZ-7020 can be interfaced directly to RS232 level serial ports. The AT-WIZ-7020 transceiver modules are transparent (virtual wire) devices and therefore do not require any special drivers and no special data formatting is required.

  • 10 user programmable operating frequency channels in 433MHz-434MHz band
  • Four user programmable RF output power levels from -8dBm up to +10dBm
  • Transparent wireless serial data transceiver
  • Automatic error detection and correction
  • Low latency
  • 5V level CMOS/TTL I/O data port via 10 pin header (2 rows x5 pins)
  • 5V operation, 30mA
  • On-board jumper configurable data rates for: 9600bps, 19.2Kbps, 38.4Kbps, 57.6Kbps or 115.2Kbps
  • On-board jumper configurable “Test Mode” transmits test data packets
  • I/O port expandable to RS-232 with our W232 serial adapter cable
  • RPSMA antenna connector for a choice of antenna and antenna extension cable options
  • Based on the AT-XTR-7020 RF transceiver module. See data sheet for more info
  • Compatible with AT-XTR-7020 RF modules, RF-USB and RF-232 transceivers
  • Lightweight and low profile

   data sheet 

Antenna

module with antenna, module without antenna

RS232 Data Cable

module with RS232 Cable, module without RS232 cable